Shure Brothers Incorporated
222 Hartrey Avenue
Evanston IL 60202-3696 U.S.A.
Model 550L User Guide
•
•
Reliability plus—under all operating conditions
Neoprene feet prevent microphone slipping
PRESS-TO-TALK SWITCH OPERATION
The fingertip control bar is a non-locking switch;
simply depress the control bar and release after trans-
mission.
CONNECTIONS
Figure 1 shows the internal wiring of the 550L
microphone. The 550L is designed for balanced-line,
low-impedance operation. The WHITE and GREEN
cable leads are the two conductors for the microphone
circuit; the shield is connected to the amplifier or chas-
sis ground. The RED and BLACK leads control an ex-
ternal relay or switching circuit.
MODEL 550L
OMNIDIRECTIONAL DYNAMIC
BASE STATION MICROPHONE
TRANSMIT
The Shure 550L is a dynamic base station micro-
phone with a frequency response specially tailored for
voice intelligibility. It is equally useful for radio commu-
nications, paging and dispatching systems, and its
low-impedance connection makes it adaptable to most
PA amplifiers. The low-impedance design also makes
itusefulforlongruns, orunderseverehumdisturbance
conditions.
RED
BLACK
WHITE
GREEN
SHIELD
RED
ORANGE
The microphone is not affected by heat or humidity.
Its exclusive ARMO-DURR case is immune to oil,
grease, fumes, salt spray, sun, rust, and corrosion
—and is outstanding in its ability to resist mechanical
shocks and vibration. The “Million-Cycle” leaf-type
switch is designed to withstand rigorous operating
conditions and constant use.
INTERNAL CONNECTIONS
FIGURE 1
Low-impedance operation is extremely useful
where long cable lengths are required, or under condi-
tions of severe hum disturbance. The permissible
cable length is practically unlimited, since neither re-
sponse nor level is appreciably affected. Shure A95
Series Line Matching Transformers are available for
use in those cases where a low-impedance micro-
phone is to be used with an amplifier with a high-
impedance input. These transformers provide a proper
impedance match between a 19- to 300-ohm micro-
phone and a high-impedance input, and are available
with various input and output connectors.
Features
•
Low-impedance operation for long cable runs or
severe hum disturbance
•
•
Crisp, natural, high-intelligibility voice response
Fingertip control bar actuates microphone circuit
and external relay or control circuit
•
•
Long-life switch meets rigorous requirements of
communications and paging systems
Sturdy, high-impact ARMO-DUR base and micro-
phone case—impervious to corrosion
E1998, Shure Brothers Incorporated
27A8090 (RB)
Printed in U.S.A.
|
Shark Iron GI408Z 10 User Manual
Shark Skin Care Product sc3901w User Manual
Sherwood DVD Player VD 4500 User Manual
SMSC Switch LAN8710 User Manual
State Industries Water Heater SHE 50 76N User Manual
Sunbeam Cookware FP4500 User Manual
Sunbeam Scale 78411 04 User Manual
Swann Security Camera Imitation Security Camera User Manual
Sylvania MP3 Player SMPK7904 User Manual
Tannoy Speaker V12HP User Manual